This is a 12 inch by 12 inch sheet of patterned printed heat transfer vinyl (htv) or adhesive vinyl.
HTV requires a mask to be applied. You can also use a previously used carrier sheet from another press or purchase this with a sheet of mask. It is reusable for up to a few uses. I have mask listed in a separate listing if you need a full sheet. A starter piece will be included.
- Adhesive (Sticker)
- Blackout Adhesive
- Clear Gloss Adhesive
- Clear Matte Adhesive
- Glitter Adhesive
- Removable Adhesive
- White Cling
- Clear Cling
- Glitter HTV
- Waterslide Clear
- Waterslide White
MEDIAS TO CHOOSE FROM:
STICKER: white vinyl sticker; semi-gloss, opaque, but if on glass, it can faintly be seen from the other side-has a light gray permanent adhesive
CLEAR GLOSS: shiny, glossy clear sticker; see through-has a permanent adhesive LOOKS BEST ON A WHITE OR LIGHT BACKGROUND.
CLEAR MATTE: see through, but has a matte, etched look-has a permanent adhesive LOOKS BEST ON A WHITE OR LIGHT BACKGROUND.
REMOVABLE: this is a white vinyl with a matte finish and a temporary adhesive so it can be applied to walls or any other surface and will not leave a sticky residue when removed. not intended for outdoors or on anything that will get wet or washed. (ink is waterproof, but the adhesive is not)
BLACKOUT: white vinyl sticker; matte finish, has a dark gray adhesive so the image cannot be seen from the other side, good for putting on glass jars, bottles, windows.-has a permanent adhesive
TRANSPARENT GLITTER: see through but a dense silver multi-color glitter base, color printed on it is vibrant but you must be choosy as to what you put it on. A white background looks best and is represented in any photo I post because the paper backing it comes on is white, but the colors of the image will look different depending on what color background you apply the sticker to. The same goes for the two clear stickers up above.-has a permanent adhesive
WHITE CLING: this is static cling. It is white and not see though. The image will have a white background and a white outline just like the sticker. It is removable AND reusable. Save the backing to store your cling image on. Great for holidays where you want to display the image during certain times, remove it and store it for another time. Great for glass. THERE IS NO ADHESIVE
CLEAR CLING: same as above but only clear. The image will be a bit transparent so this is good for a smooth, hard surface other than glass. THERE IS NO ADHESIVE. LOOKS BEST ON A WHITE OR LIGHT BACKGROUND
HTV: This is for textiles like shirts and bags. This is a smooth heat transfer vinyl and needs to be applied using a heat press. A home iron can be used but it is hard to gauge the temperature and pressure. But if you are used to applying htv with a home iron, then this will work just fine. It is a white opaque htv that I print on. It is "backwards" on the carrier so I can print on the front. The adhesive part is on the back, against the plastic carrier sheet. So your art needs to be front facing or right reading (meaning, do not mirror), then you cut it that way with the pattern face up and then you weed it and then you use a mask (which is pretty much heat resistant transfer tape) to lift off your weeded design and place it onto your shirt then press. A mask sheet is not included in your purchase. You can purchase a separate 12 inch by 12 inch sheet of mask in another listing I have here in my shop. A starter piece will be included BUT you can use a clear carrier sheet that you usually throw in the trash (hopefully recycle bin). I have a drawer where I save my sheets so I can use them for printed vinyl. So start saving yours. *cut and press settings are included with your purchase. Printed on Stahls Premium Print
GLITTER HTV: Same as above but this is printed on a textured white glitter htv with multi colored glitter (can barely tell it's colored, looks pretty much white, but the specs of color give a nice sparkle). This will have a small piece of mask included because it is unlikely you can use your regular used carriers because of the texture. A high tack mask in needed to lift this design off its carrier to place on your garment. You usually want a small accent design with this media since it is pretty thick. If you want a larger design, you will need to purchase a 12 inch by 12 inch sheet of high tack mask for it. A starter piece will be included but you can purchase a full sheet here in my shop. Printed on Stahls Glitter Flake Rainbow White
WATERSLIDE FILM: I print this image on a 12 x 7.5 inch sheet of waterslide film. You can choose clear or white film. The clear must be applied to a white or light background as the inks are translucent (see through) and the background will show through. The white can be applied to any color, it is opaque (not see through). This is printed using eco-solvent inks so you get the quality of inkjet and the benefit of waterproof, permanent ink. So no spray sealing is necessary.
This is high quality graphics printed using a commercial printer using eco-solvent inks.
Your 12 inch by 7.5 inch sheet will ship flat in a sturdy envelope via USPS First Class. Included will be instructions for cutting and pressing.
Please let me know if you have any questions. I will include cut settings for several cutting machines including
Brother Scan n Cut
there are also videos on YouTube to show how to apply these.
When cutting printed material, do not mirror
Use mask or transfer tape to lift design off carrier
for htv: place on shirt and use heat press or home iron to apply
for adhesive, place on hard smooth surface (clean with alcohol and let air dry first)
save your mask/transfer tape to reuse
Patterns Heat Transfer Vinyl
On trend, on demand.
This patterned heat transfer vinyl is digitally printed on Express Print® vinyl by Stahls. Offer full color graphics without your own print/cut machine.
Cuts and weeds easily
Patterns Mask is needed to remove graphics from the carrier.
*for all vinyl, please allow for a 1/4" variance
Copy and paste this link in a new window in your browser that takes you to my video on YouTube showing you how to apply mask to your printed htv. https://youtu.be/rs9xtvYU-vY
I apologize, but I do not accept returns on any printed product or offer any refunds on printed products or digital downloads. Please make sure you order exactly what you want before making your purchase. Did you make a mistake? Did I make a mistake? It happens, just contact me.